Airway Buffing Wheel — Medium Cut 6″ / 152mm (16 Ply)

6″ Medium Cut Airway Buffing Wheel – Metal Polishing

The compact version of our medium cut wheel — the bridging step between heavy cut and finishing, sized for tighter, more intricate areas where a 10″ wheel is too bulky. Think fuel tank ends, step edges, toolbox corners, and rims. 16-ply cotton construction keeps the wheel stable and controlled in close quarters.

How To Use: Mount with a matched 2″ safety flange for balance and safety. Apply your compound to the wheel face and work in overlapping passes, letting the wheel and compound do the work rather than forcing pressure — especially important in tight areas where control matters more than speed. Approximate starting speed is 3,500 RPM with either compound.

Two ways to run this wheel. With 439T it becomes a cutting wheel — less aggressive than 439T on a red wheel, which makes it a good choice when the metal needs real work but not the hardest cut available. With P14F it refines, tidying up the finish after a heavy cut stage or working sound metal straight to a good surface.

One compound per wheel. The wheel type takes either compound, but each individual wheel you own should only ever meet one of them. If you want to run both 439T and P14F on yellow wheels, buy two and keep them separate.

Not sure which compound or speed to use? See our Metal Polishing Wheel & Compound Guide.

Complete Your Polishing Setup

• Menzerna 439T Green Rouge Bar – Heavy Cut
• Menzerna P14F White Rouge – Medium Cut
• Aluminium Safety Flange Set Small (2″ centres)