Highway Shine Co. supplies professional metal polishing gear Australia-wide and to New Zealand — everything you need to take aluminium or stainless steel from dull and oxidised to a genuine mirror finish. We're not just an online store; we polish trucks and metal professionally ourselves, so what we stock and recommend comes from what actually works on the job, not just what's easy to sell.
Whether you're a detailer, fabricator, fleet operator, or doing a one-off restoration in the shed, this is the full range: airway buffing wheels in heavy cut, medium, and finishing grades, Menzerna compound bars matched to each stage, liquid and sprayable metal polishes for maintenance between full cuts, and the sanding discs, backing pads, flanges, and adapters you need to run it all safely on a grinder or polisher.
What's in this range
-
Buffing wheels — 6″ and 10″ airway wheels in heavy cut, medium, untreated cotton, and flannel finishing grades
-
Polishing compounds — the Menzerna bar range, from aggressive heavy cut through to ultra-fine super finish
-
Liquid and sprayable polishes — for maintenance shine between full machine polishes, no grinder required
-
Sanding and surface prep — discs from 80 to 800 grit, interface pads, and backing plates
-
Flanges and adapters, plus tools — safety flanges, arbour extensions, and cleaning rakes to keep your wheels running true
Working on a truck? See the truck polishing supplies range, or start with a ready-made aluminium polishing kit.
Choosing the right gear for the job
Most polishing jobs follow the same basic sequence, whether it's a fuel tank, a set of alloys, or a stainless bench: sand if there's real damage to remove, then heavy cut compound and wheel to shift oxidation, medium cut to refine, flannel wheel with a fine compound for the mirror finish, then liquid polish to maintain it. The exact combination depends on the metal's condition going in — badly oxidised aluminium needs the full sequence starting with sanding, while a lightly tarnished panel might only need a medium cut and a finish pass.
Not sure where to start? Each product page on this site lists what it's best for, the recommended wheel or compound pairing, and the next step in the sequence — so you can build a setup without guessing.
Common questions
What's the difference between a buffing compound and a metal polish? Compounds are used with a buffing wheel and grinder for machine polishing — they cut faster and give a deeper result. Liquid and sprayable polishes are for hand application, better suited to maintenance and touch-ups than correcting real oxidation or damage.
Can I use the same gear on aluminium and stainless steel? Mostly yes — our wheels and Menzerna compounds work on both, though aluminium is softer and cuts faster, so it's easier to overheat or swirl-mark if you're too aggressive with wheel speed or pressure.
Do you ship Australia-wide and to New Zealand? Yes — we supply professional polishers and businesses right across Australia, not just locally, and to New Zealand with Australia Post International. Orders are dispatched within 2–3 business days.
